The smartGAS Calibration Tool
The smartGAS Calibration Tool enables quick and simple calibration for both the diffusion (basic) and flow evo series of sensors both individually and in combination with the optional Connect Interface electronic board. The software offers users many practical functions:
– Readout of sensor information and operating states
– Setting the zero point and end point using calibration gases
– Resetting the zero point to the factory settings
– Resetting the end point to the factory settings
– Graphical display of the gas concentration during calibration
– Measured values displayed as diagram in the final report
– Generation of data records for remote diagnostics by smartGAS
Download the smartGAS Calibration Tool
You can download the smartGAS Calibration Tool immediately and use it free of charge.
In addition to offering the many functions listed above, the software guides the user through the modbus address set-up and the calibration procedure. A service report can be saved or printed upon completion.
In order to use the software a smartGAS USB communication adapter is required, two types are available for use with and without a connect interface card.
How to install and set up your Software:
1. Download the smartGAS Calibration Software and install it on your PC or Laptop https://www.smartgas.eu/fileadmin/02_produkte/software/smartGAS_Calibration_Tool_v1.21_en.zip
2. Ask for your free personal license key under this LINK
3. Enter your 25 digit license key in your smartGAS Calibration Software under “Product Activation”
4. After installation, you can open and use the software with the PIN specified in the instructions.
Requires:
Windows 7 or higher (x86 oder x64); PC administration rights; 1GHz dual-core Prozessor, 2GB RAM, 200MB free storage; Microsoft .NET Framework; Communication adapter hardware
Auxiliary Modules
Accessories
Enquire about this product.
To ensure this item is exactly what you’re looking for, fill out the form below and one of our experts will be in touch to help.