The sensor module provides rapid and accurate oxygen concentration measurements within the range 0…5% (ML05), 0…25% (ML25) or 0.1…95% (ML95). The oxygen sensor is either soldered onto the PCB(FCX-MLxx-CH) and covered with an aluminium flow housing or the oxygen sensor is connected to the PCB via a cable (FCX-MLxx-Ext-CH) , in this case it functions in diffusion mode unless it is enclosed in special flow housing. In this case it can be Output is a logarithmic current output signal 4…20mA (according to IEC 60381) as a function of oxygen partial pressure
Features:
Fast response time: T90 < 8s flow applications T90 < 30s diffusion applications
High accuracy: ±0.1% FS < 1% O2 ±0.2% FS < 10% O2 ±2.0% FS >10% O2
Output: 4-20mA only
Low power consumption: <2W
Power Supply: 24V DC
Gas Temp: -10 – 50 °C
Env Temp: -20 – 70 °C
RH: 0-100% (non condensing)
Applications:
- CO2 incubators
- O2 generators
- Food packaging
- Industrial Safety and Control
Auxiliary Modules
Accessories
Enquire about this product.
To ensure this item is exactly what you’re looking for, fill out the form below and one of our experts will be in touch to help.