Open Menu

Filter Products
PUC 28 / PUC 28 K Process Monitoring System

PUC 28 / PUC 28 K Process Monitoring System

Process monitoring system with plastic surface and inputs for humidity, temperature or external pressure transmitters Special features High level of accuracy and long-term stability through automatic zero-point calibration Easy configuration of the measuring range, analog output, time constants and units via keyboard or RS 232 (optional) PROFIBUS DP interface (optional)… more info
Get in touch
Description

Process monitoring system with plastic surface and inputs for humidity, temperature or external pressure transmitters

Special features

  • High level of accuracy and long-term stability through automatic zero-point calibration
  • Easy configuration of the measuring range, analog output, time constants and units via keyboard or RS 232 (optional)
  • PROFIBUS DP interface (optional)
  • Graphic LCD display
  • 2 floating switching relays
  • Selectable output signal 0 .. 10 V or 0/4 .. 20 mA
  • Selectable attenuation of the output signal from 0 .. 40 s
  • Acoustic alarm when the threshold value is out of range, acknowledgement via key
  • Calibration via calibration inputs led out of the front plate (optional)
  • Two additional pressure connectors, accessible from the front, for easy onsite calibration (PUC 28 K)
  • Highly stable measurements thanks to cyclical self-calibration of the zero point
  • High level of overpressure protection even in the smallest measuring ranges protects the instrument against pressure peaks or incorrect operation
  • Scaleable measurement range offers increased measurement accuracy

The PUC 28 process monitoring system is especially suitable for pressure monitoring applications in cleanrooms, laboratories, pharmaceutical plants and operating theatres. The system has two electrical inputs for humidity, temperature or external pressure transmitters. The measurement values provided by these devices are displayed on the graphic LCD display. As well as recording differential pressure, it also measures positive and negative overpressure and is freely scalable within the measuring range.
Two optional contact points allow the user to connect visual or audible alarms that are triggered any time values rise above or fall below specified limits. These threshold values can be set as parameters both for the internal differential pressure sensor and for the external humidity, temperature or pressure transmitter. The transmitter can be configured easily via an RS 232 interface (optional) with software. This can also be performed using a keyboard and display. A selectable time constant allows the transmitter to be adjusted perfectly to the pressure conditions and thus ensures a stable output signal.
The PUC 28 is suitable for wall mounting in cleanrooms due to its smooth, solvent-resistant plastic surface. The device is easily integrated into central building control systems via the optional PROFIBUS DP interface. In this case, the Profibus connection acts as a gateway for the analogue signals from the external transmitters, which thus require no PROFIBUS DP interface of their own. Calibration ports are available on the front of the instrument for on-site calibration (optional with the PUC 28 K). There is therefore no need to remove the instrument from its position on-site.

Files & Datasheets