The Figaro AM-1 is a sensor module which is useful for evaluating the application of Figaro’s air quality sensors into air quality control products. The module contains a gas sensor, microprocessor, and control circuit.
Specification
Item |
Specification |
||
Power Supply |
5.0±0.2V DC |
||
Power Consumption |
AM-1-2600: Max 0.8W Others: Max 1.2W |
||
Target Gas |
Indoor atmospheric pollution caused by deoxidizable pollutant gases (note: does not react to dust) |
||
Sensitivity (factory preset) |
High |
3ppm of H2 |
|
Low |
6ppm of H2 |
||
LED Display |
LED1 (green) |
good |
|
LED2 (red) |
polluted |
||
LED3 (amber) |
low pollution level |
||
LED4 (amber) |
medium pollution level |
||
LED5 (amber) |
high pollutionlevel |
||
Microprocessor output terminals |
Active level |
“Low” (for C-MOS open drain output of each terminal) |
|
Max. output current |
+20mA including LED driving current |
||
Output terminal of +5V power supply |
Max. output current |
0.5A |
|
Operational temperature range |
-10˚C ~ +50˚C, 5 ~ 70%RH (avoid condensation on the unit) |
||
Storage temperature range |
-20˚C ~ +60˚C, 5 ~ 90%RH |
||
Dimensions |
70mm x 70mm x 40mm |
||
Weight |
20g |